关键字 · BUILD

All guides / Open source

Bygga: type the name on an IKEA box and follow every assembly step in 3D, read out loud

Bygga is open source: type the name or number on an IKEA box and follow each step in 3D, read aloud. Free, no account. How to use it, plus safety tips.

If you've ever sat on the floor with a flat-pack box, a bag of screws and a booklet with no words in it, this one's for you. Bygga is an open-source project (MIT license): type the name or article number on an IKEA box and follow every assembly step in 3D, drawn like the paper manual and read out loud. Nothing to install: the website, usebygga.com, is free with no account. One thing to know: Bygga is an independent, unofficial project, not affiliated with IKEA, and every guide sends you to the official manual on ikea.com so you can check it.

01What you get

An assembly manual that moves and talks. Type the big word on the box label, like KALLAX, or the number under it, like 802.758.87, and the guide opens.

  1. Every step plays as 3D line art with each screw shown up close, and you can drag it to see any side;
  2. Every step is read out loud, using pre-recorded voice clips that need no key;
  3. Every panel has a letter and every fitting has a count, so you know which piece and which way round;
  4. You get an overview first: for the MALM chest of 3 drawers, about 1 h 30 min, one person, 27 panels, 180 fittings and 33 steps, plus the tools you need.

02Build a piece of furniture in five steps

  1. Go to usebygga.com, type the product name or number from the box, pick your size, read the overview and press Start building;
  2. Grab your tools: there's a card for each tool. Missing one? Tap it to see what to use instead;
  3. Check the box: lay everything out and tap only what's missing. If nothing is, it's one tap and you're through;
  4. Follow each step in 3D: each one is a short animation read out loud. Press Done, next step when you finish. Heavy pieces come with a reminder to grab a second person;
  5. Done: you'll see your time on the Done screen, and the build is saved to your Workshop page.

03Optional AI features, offline use and printing

The basic guides need no key. A few extra AI features use your own Together AI key, which stays in your browser:

  1. Hands-free: say "next" to move on; it also understands "back", "again" and "stop";
  2. Ask when you're stuck: speak or type, and hear the answer;
  3. Snap the box label to find its guide;
  4. Get a draft guide for a product that isn't in the catalog yet.

Guides you've opened keep working with no signal, and Print this guide gives you an A4 version with the tools, part counts and every step.

04For developers: run it yourself

Bygga is a Next.js app. Following the README, clone it, install it, start it and open http://localhost:3000. To try the AI features, copy .env.example to .env.local and set TOGETHER_API_KEY.

Start commands (exactly as in the README)
git clone https://github.com/Nutlope/bygga.git && cd bygga && npm install
npm run dev

05Good to know: it is not IKEA

Bygga isn't affiliated with, sponsored or endorsed by IKEA. IKEA and product names like KALLAX, BILLY and MALM are IKEA trademarks. The guides are drawings the project generates itself, not IKEA's instructions.

06Links

Sources

Related guides